1.
the wavelength:
"\\lambda=vT"
where v is wave speed,
T is period
"\\lambda=17v"
2) Noise voltage is given by, "V^2=4kT \\int_{f1}^{f2} Rdf"
Where V= RMS input noise voltage, "f_2-f_1=band \\space width=3.33KHz=3.33\\times 10^3Hz"
k= Boltzmann constant"=1.38\\times 10^{-23}J\/K"
T=temperature in kelvin =29+273=302K
"R=Resistance=42\\Omega"
Now, "V=(4kTR(f_2-f_1))^{0.5}=(4\\times1.38\\times 10^{-23}\\times 302\\times42\\times 3.33\\times 1000)^{0.5}=482.86\\times 10^{-10}V"
3) Signal-to-noise ratio "=2.3\/0.7=23\/7=23:7"
4) Initial frequency fi = 73 kHz
Final frequency ff = (73 + 18) kHz = 91 kHz
Let Station 1, Station 2 and Station 3 be A, B and C respectively.
The fUSB of A = 73 kHz + fm (6 kHz) = 79 kHz
The fUSB of B = 79 kHz + fm (6 kHz) = 85 kHz
The fUSB of C = 85 kHz + fm (6 kHz) = 91 kHz
Where: fUSB is the Frequency of the Upper Side-bands, while fm is the modulating frequency at which each station is allowed to transmit.
Therefore, the frequency of the upper and lower side-bands of each station are given by:
Note: fLSB means Frequency of the Lower Side-bands.
5) Root mean square value of the shot noise current in is given by the Schotty formula:
In="\\sqrt{2\\Iota{q}\\Delta\\Beta}"
Where:
"\\Iota" =Dc current in Amperes
q= charge of an electron in Coulombs
"\\Delta""\\Beta" = the bandwidth in Hertz
Substituting
In= "\\sqrt{2\u00d70.5\u00d710^{-3}\u00d71.602\u00d710^{-19}\u00d710\u00d710^3}"
"\\sqrt{2\u00d70.5\u00d710^{-3}\u00d71.602\u00d710^{-19}\u00d710\u00d710^3}"
In =1.266"\u00d710^{-9}A"
=1.266nA
Comments
Leave a comment